iRadioPOP
Backend Management
Operation Guide
Welcome
to iRadioPOP Backend System. You may go through this manual thoroughly or jump
to the chapter directly.
1.
Introduction
In iRadioPOP Backend
Management system, you could easily set up your own advertisements and account/profile
information. For advertisements setting, we provide three different areas:
banner, logo and live message.
To manage your iRadioPOP’s
logo, banners, live messages, or group setting, please visit http://www.iradiopop.com/IRD/pages/manage/login.jsp
(1) Enter the Customer ID and Password in the fields,
and click [Sign In]. The system will verify them for you to login.
If you tried 3
times with wrong ID or password, this customer ID will be locked. To unlock
this ID, please e-mail to services@iradiopop.com.
(2) If
you forget the ID or password, click the [Forget your ID or password].
l
Forgot
password:
Please enter your customer ID and press
[Get Password]. In [Your question] field, it will show the question you set in
Group Setting (Chapter 2.4), please enter your answer and
press 
. If the answer is correct then the password
will show in [Your password] field.
l
Forgot
customer ID:
Please
enter the e-mail address which you set previously in Group Setting (Chapter 2.4) and press [Find Customer ID]. If this e-mail
address matches, then the system will send your customer ID and password to
this e-mail account immediately.
l
If
you don’t remember anything:
Please e-mail to services@iradiopop.com or contact our
sales representative.
Once you login, you will see the following homepage for you to choose the
functions. No matter where you are in our website, when you press 
, the page will also be directed to this Home
page.
You will see the above header anywhere in
this system.
(1)
Showing
the function name you are now using.
(2)
Hot-Key
for function selecting.
(3)
Back
to Home page.
(4)
Open
the link of the help file in another window.
(5)
Sign
out. You will logout from this system. The page will be directed to the [Sign In]
page. If you want to edit more data, please sign in again.
In this page you could
change customer ID or Password.
A. To change customer ID, please enter 6 ~ 10
characters with alphabets, integers or combined.
B. After enter a new customer ID, please press 
to insure this customer ID is valid and
unique.
C. If the new customer ID is valid, please re-type
this customer ID and press 
to save it. You have to use this new ID
at next login.
A. If you want change password, please enter 6~12
characters combined with alphabetic and integer and re-type new password to
confirm.
B. Please enter e-mail address; in case you forget
customer ID, system would send customer ID and password to this e-mail account.
See also chapter 2.1(2).
C. Please enter a personal question and answer to be
the hint while forgetting password. See also chapter 2.1(2).
D. Click [Save] to save the changes.
Each customer ID can
manage multiple groups. Every group have its own settings. Please select a
group by clicking [Setting] button before starting AD setting or preview.
A. Banner
Display Mode and setup – Single Banner
a.
Select [Single Banner] and press 
, the front-end will show the corresponding
areas for editing as the right figure demonstrates.
b.
Select the area you want to setup
l
Banner
Click on the
Banner area to get into the banner setting pages. The 1 Banner indicates the
whole area in Single Banner Mode. See chapter 2.5.2.
l
Logo
Click 
to
get into the logo editing page. See chapter 2.5.3.
l
Live Message
Click 
to
get into the live message editing page. See chapter 2.5.4.
B. Banner Display Mode – Three Individual Banners
a.
If you select [Three Individual Banners] and press , the front-end will show the corresponding
areas for editing as the right figure demonstrates.
b.
Select the area you want to setup
l
Banner 1 / Banner2 / Banner 3
Click on the
Banner area to get into the banner setting pages. The number 1, 2 and
l
Logo
Click to
get into the logo editing page. See chapter 2.5.3.
l
Live Message
Click to
get into the live message editing page. See chapter 2.5.4.
l Operation flow:
l Setting
Page:
(1)
Follow
step1~ step
(2)
Preview
uploaded pictures and URL links at the right side.
(3)
Adjust
the picture sequence.
Select
the picture and press 
or
to change the order. The adjusted order will
be refreshed right away. After finished the adjustment, please click [Save] to
save the order.
(4)
Delete
If
you want delete the picture, please select the picture and click Delete
. The picture will be deleted right away; you
don’t need to click the [Save] button. So be careful with this action.
(5)
Adjust
rotation interval
If
you want change the speed of rotation, please adjust [Rotation interval], the
bigger the number is, the slower the banner rotates.
(6)
Edit
If
you want edit specific URL link of banner, please follow the steps as below.
Step
1: Select the banner.
Step
2: Click Edit
.
Step
3: At left side, enter the new URL link in the [URL link] field.
Step
4: Press Upload
.
Please
note that you can’t change pictures this way. To do this, please delete the old
ones and insert new ones as described in (1).
l Operation flow:
l Setting
Page:
(1)
Please
follow Step1 ~ Step3 to upload a logo picture and URL link.
(2)
Preview
uploaded pictures and URL links.
(3)
Delete.
If you want to delete the logo, please click 
.
l Operation flow:
A. Message List
You will see the existing message list as follows.
(1) Adjust messages displaying sequence
Select the message which you want to change and press
or 
to change the order. The message will move up or down right away. To
save the changes, please click [Save] button.
(2) Edit message
Select the message you want to edit and press
. After that, the editing message page will be
brought out, you may edit in this page as described in C.
(3) All
Click 
to
select all messages.
(4) Delete: if you want to delete messages,
please select messages from the list and click 
. Note that you don’t need to click [Save]
button to actually delete it, so please be careful.
B. Add Message
Click [Add Message] at
the left panel. The page will show up for you to edit.
l Please follow Step1 ~ Step6 as indicated
in the web page to append a live message.
l Next:
After pressing [Next]
button, a new blank page will show up for
you to edit a new one.
l EXIT:
When you finished all setting of live
message please press exit
, the page will back to 
. You may preview all live messages which you
edited before.
C. Edit Message
(1) Step1: Get in 
.
(2) Step2: Select the message which you want to edit.
(3) Step3: Press 
.
(4) Step4: Follow Step1 ~ Step
(5) Step5 : Press 
.
You will see the existing group list as follows.
Click the [Preview] button to preview the
advertisement of the selected group.
l
AD
Preview
Visualize advertisement setting. Depending on your
setting the system will display exactly what your end-users see.
l
Modify
If you find anything want to modify, please click 
at
the left panel to get in editing page as described in chapter 2.5.1.
l
Group
List
Go
back to Group List by clicking 
.